Papex

Open problem · Chemistry · Open

Practical lithium–air battery

Can a practically useful lithium–air battery be built?

Summary

Pairing lithium with oxygen from the air could in theory store energy at a density comparable to petrol, but problems with the electrolyte, the lithium electrode and the air electrode have so far prevented a practical rechargeable cell.

Why it is open

A lithium–air cell stores energy by combining lithium with oxygen [2]. In non-aqueous cells, oxygen is reduced at a porous positive electrode to solid lithium peroxide, Li2O2, during discharge [6]. Lithium oxide, Li2O, would store more energy [2] but needs four electrons per oxygen molecule, which is harder to achieve than the one- and two-electron reactions that give lithium superoxide (LiO2) and Li2O2 [14]. Cells with water-based electrolytes form lithium hydroxide instead [2].

Counting the active materials alone, Jake Christensen and colleagues calculated theoretical specific energies of 3.46 kWh/kg for Li2O2 and 5.22 kWh/kg for Li2O, against 1.03 kWh/kg for an advanced lithium-ion positive electrode material [2]. For a complete non-aqueous cell they estimated about two to four times the specific energy of a comparable lithium-metal cell with a lithium-ion type positive electrode, numbers they describe as optimistic; carrying oxygen in a tank would reduce the advantage considerably [2].

The obstacles are several problems at once. In 2012 the same review found that in non-aqueous cells "reversible chemistry with a high current efficiency over several cycles has not yet been established", that an electrically resistive discharge product limits capacity, and that both aqueous and non-aqueous cells suffer from slow oxygen reactions and harmful changes at the lithium electrode [2]. In 2012 most laboratory work used pure oxygen, because water and carbon dioxide in air interfere [2]; in 2018 such systems were still "largely restricted to pure oxygen environments" [13].

No body sets a bar for a resolution, and the listing does not define "practically useful". The sources point to what would be needed: charge that goes almost entirely into forming and removing the intended product [2, 12], operation in air rather than pure oxygen [13], electrodes with the high capacity per area assumed in practical estimates [2], and a stable lithium electrode [2].

What is known

Electrolyte decomposition (2011–2012). In alkyl carbonate electrolytes, Stefan Freunberger and colleagues found that discharge decomposed the electrolyte, giving a lithium alkyl carbonate, lithium carbonate, formate and acetate, carbon dioxide and water; these products accumulated in the positive electrode and correlated with capacity fading and cell failure [1]. Ether electrolytes form only small amounts of carbonate, but B. D. McCloskey and colleagues showed that Li2O2 or LiO2 still reacts with both the electrolyte and the carbon electrode, leaving about a monolayer of carbonate at each interface; in a theoretical model, the layer at the carbon cuts the exchange current density, the intrinsic rate of the electrode reaction, 10- to 100-fold [4]. They expected these "twin problems" to be general [4].

Clogging by the discharge product (2012–2015). Li2O2 is an electrical insulator and does not dissolve in the electrolyte; Christensen and colleagues found that films of it on the electrode surface severely limit capacity even at low discharge rates, and that blocked pores may also restrict it [2]. Nagaphani Aetukuri and colleagues put the maximum discharge capacity at "a small fraction of its theoretical value" for this reason, and showed that trace additives such as water make Li2O2 grow in solution as large toroidal particles rather than as a thin film, raising capacity [7]. Lee Johnson and colleagues proposed one mechanism for both routes, in which the solvent's effect on the solubility of LiO2 decides between growth on the surface and in solution; they concluded that solvents with a low donor number, a measure of how well a solvent stabilises lithium ions, are likely to cause premature cell death [6, 7].

Reversible cycling (2012–2016). Zhangquan Peng and colleagues reported in 2012 that with a dimethyl sulfoxide electrolyte and a porous gold electrode, Li2O2 formed and decomposed with 95% capacity retention from cycle 1 to 100 [3]. In 2013 Yuhui Chen and colleagues added tetrathiafulvalene, a redox mediator that is oxidised at the electrode and in turn oxidises solid Li2O2, and charged cells at rates impossible without it for 100 cycles [5]. In 2015 Tao Liu and colleagues formed and removed crystalline lithium hydroxide instead, using a reduced graphene oxide electrode, lithium iodide and dimethoxyethane, with 93.2% energy efficiency and a voltage gap of 0.2 volt [8]. In a published comment, Yue Shen and colleagues argued that triiodide cannot oxidise LiOH, so that the charge capacity comes from oxidising iodide, and that limited-capacity cycling tests mislead when the electrolyte adds parasitic capacity [9]. Liu and colleagues replied that LiOH reacts chemically with triiodide to form iodate and that the electrodes do not clog, showing that the solid products are removed [10].

Singlet oxygen (2017). Nika Mahne and colleagues showed that singlet oxygen, a highly reactive form of oxygen, forms at the positive electrode during discharge and from the start of charge and accounts for the majority of parasitic reaction products; more forms at higher charging voltages and with trace water, and singlet-oxygen traps and quenchers reduced the side reactions [11].

The lithium electrode (2012). Christensen and colleagues describe dendrites, needle-like lithium growths that can pierce the separator during charging and short the cell, as the most common failure mode of lithium-metal electrodes, and noted that rechargeable lithium-metal cells had not yet been introduced successfully and widely despite decades of work [2].

Lithium oxide and air (2018). C. Xia and colleagues reported a cell with an inorganic electrolyte that cycles at an elevated temperature by forming and removing crystalline Li2O, with a capacity of 11 mAh/cm²; online mass spectrometry and chemical quantification showed exactly four electrons per oxygen molecule on oxidation [12]. Mohammad Asadi and colleagues reported a cell with a lithium-carbonate-protected lithium electrode, a molybdenum disulfide positive electrode and an ionic-liquid and dimethyl sulfoxide electrolyte that cycled up to 700 times in a simulated air atmosphere [13].

Recent claims. On 3 February 2023, in Science, Alireza Kondori, Asadi and colleagues at the Illinois Institute of Technology and Argonne National Laboratory reported a room-temperature cell with a solid composite electrolyte, Li10GeP2S12 nanoparticles in a modified polyethylene oxide matrix, in which Li2O is the main discharge product; it was rechargeable for 1,000 cycles with a low polarisation gap and could operate at high rates [14]. They attribute the four-electron reaction to a discharge product that conducts both ions and electrons, and to its interface with air [14]. A Perspective by Dejian Dong and Yi-Chun Lu in the same issue summarised the result as "a solid-state electrolyte enables a lithium-air battery to operate at 25°C" [15]. The result comes from a single collaboration [14].

Main approaches

Stable electrolytes and electrodes. The aim is an electrolyte and electrode that survive contact with reduced oxygen species [1, 3, 4]. Strongest evidence: the dimethyl sulfoxide and gold cell retained 95% of its capacity over 100 cycles, a result from one group [3]. Main difficulty: carbonate forms at interfaces even in ethers [4], and singlet oxygen degrades electrolyte and carbon during both discharge and charge [11].

Discharge through solution. The aim is to grow Li2O2 in solution as large particles rather than as an insulating film [6, 7]. Strongest evidence: capacity rises with added water, together with toroid growth [7]. Main difficulty: water also brings parasitic chemistry [7] and increases singlet-oxygen formation [11]; Johnson and colleagues called for new stable electrolytes with a high donor number [6].

Redox mediators. Dissolved molecules carry charge to and from solid discharge products [5, 8]. Strongest evidence: recharge at otherwise impossible rates over 100 cycles [5]. Main difficulty: with a mediator present, the source of the charge capacity can be disputed, as for iodide in hydroxide cells [9, 10].

Other discharge products. Cells are designed to form Li2O or LiOH instead of Li2O2 [8, 12, 14]. Strongest evidence: an exact four-electron count for Li2O at elevated temperature, from one group [12], and the room-temperature Li2O cell [14]. Main difficulty: the four-electron count was shown in a cell run at an elevated temperature with an inorganic electrolyte [12], and the room-temperature result comes from one collaboration [14].

Air and a protected lithium electrode. The aim is a cell that runs in air, with a lithium electrode protected from the electrolyte and the air [2, 13]. Strongest evidence: 700 cycles in simulated air, a result from one collaboration [13]. Main difficulty: dendrites and unstable surface films on lithium [2], and side reactions that become more complex with nitrogen, carbon dioxide and water vapour present [13].

Open sub-questions

  1. Counting electrons at room temperature. Does online mass spectrometry, as used by Xia and colleagues at elevated temperature, show four electrons per oxygen molecule on both discharge and charge in the composite-electrolyte cell of Kondori and colleagues [12, 14]?
  2. Singlet oxygen in solid-state cells. Do singlet-oxygen traps detect singlet oxygen in solid-electrolyte lithium–air cells, and does the polymer degrade as liquid electrolytes do [11, 14]?
  3. Iodide or hydroxide. In iodide-mediated LiOH cells, what share of the charge capacity comes from removing LiOH, and what share from oxidising iodide or the electrolyte [8, 9, 10]?
  4. Capacity without side reactions. Can growth through solution reach the capacities above 10 mAh/cm² assumed in practical-cell estimates without raising singlet-oxygen formation from water [2, 7, 11]?
  5. Carbon-free interfaces. Does a gold or other non-carbon positive electrode remove the interfacial carbonate layer and its 10- to 100-fold loss in exchange current density [3, 4]?
  6. Air components. In cells cycled in simulated air, what fraction of the discharge product is Li2O2, and what fraction carbonate or hydroxide formed from carbon dioxide and water [2, 13]?

Work on this in Papex

If you have a testable answer to one of the sub-questions above, you can draft it as a private hypothesis in Papex, or prepare the draft from Claude or ChatGPT with the Papex connector. You review the exact version, sign it and decide whether to publish it; a public record that names this problem is listed on this page. A Papex record shows who signed which version and when. It is not peer review and does not mean the hypothesis is correct.

Key references

  1. Freunberger, S. A., Chen, Y., Peng, Z., Griffin, J. M., Hardwick, L. J., Bardé, F. et al. (2011). Reactions in the rechargeable lithium–O2 battery with alkyl carbonate electrolytes. Journal of the American Chemical Society 133(20), 8040–8047. 10.1021/ja2021747 · Checked 15 Oct 2026
  2. Christensen, J., Albertus, P., Sanchez-Carrera, R. S., Lohmann, T., Kozinsky, B., Liedtke, R., Ahmed, J. & Kojic, A. (2012). A critical review of Li/air batteries. Journal of the Electrochemical Society 159(2), R1–R30 (published online 2011). 10.1149/2.086202jes · Checked 15 Oct 2026
  3. Peng, Z., Freunberger, S. A., Chen, Y. & Bruce, P. G. (2012). A reversible and higher-rate Li-O2 battery. Science 337(6094), 563–566. 10.1126/science.1223985 · Checked 15 Oct 2026
  4. McCloskey, B. D., Speidel, A., Scheffler, R., Miller, D. C., Viswanathan, V., Hummelshøj, J. S. et al. (2012). Twin problems of interfacial carbonate formation in nonaqueous Li–O2 batteries. The Journal of Physical Chemistry Letters 3(8), 997–1001. 10.1021/jz300243r · Checked 15 Oct 2026
  5. Chen, Y., Freunberger, S. A., Peng, Z., Fontaine, O. & Bruce, P. G. (2013). Charging a Li–O2 battery using a redox mediator. Nature Chemistry 5(6), 489–494. 10.1038/nchem.1646 · Checked 15 Oct 2026
  6. Johnson, L., Li, C., Liu, Z., Chen, Y., Freunberger, S. A., Ashok, P. C. et al. (2014). The role of LiO2 solubility in O2 reduction in aprotic solvents and its consequences for Li–O2 batteries. Nature Chemistry 6(12), 1091–1099; erratum DOI 10.1038/nchem.2138 (17 December 2014). 10.1038/nchem.2101 · Checked 15 Oct 2026
  7. Aetukuri, N. B., McCloskey, B. D., García, J. M., Krupp, L. E., Viswanathan, V. & Luntz, A. C. (2015). Solvating additives drive solution-mediated electrochemistry and enhance toroid growth in non-aqueous Li–O2 batteries. Nature Chemistry 7(1), 50–56 (published online 2014). 10.1038/nchem.2132 · Checked 15 Oct 2026
  8. Liu, T., Leskes, M., Yu, W., Moore, A. J., Zhou, L., Bayley, P. M., Kim, G. & Grey, C. P. (2015). Cycling Li-O2 batteries via LiOH formation and decomposition. Science 350(6260), 530–533. 10.1126/science.aac7730 · Checked 15 Oct 2026
  9. Shen, Y., Zhang, W., Chou, S.-L. & Dou, S.-X. (2016). Comment on "Cycling Li-O2 batteries via LiOH formation and decomposition". Science 352(6286), 667. 10.1126/science.aaf1399 · Checked 15 Oct 2026
  10. Liu, T., Kim, G., Carretero-González, J., Castillo-Martínez, E. & Grey, C. P. (2016). Response to Comment on "Cycling Li-O2 batteries via LiOH formation and decomposition". Science 352(6286), 667. 10.1126/science.aaf1652 · Checked 15 Oct 2026
  11. Mahne, N., Schafzahl, B., Leypold, C., Leypold, M., Grumm, S., Leitgeb, A. et al. (2017). Singlet oxygen generation as a major cause for parasitic reactions during cycling of aprotic lithium–oxygen batteries. Nature Energy 2(5), 17036. 10.1038/nenergy.2017.36 · Checked 15 Oct 2026
  12. Xia, C., Kwok, C. Y. & Nazar, L. F. (2018). A high-energy-density lithium-oxygen battery based on a reversible four-electron conversion to lithium oxide. Science 361(6404), 777–781. 10.1126/science.aas9343 · Checked 15 Oct 2026
  13. Asadi, M., Sayahpour, B., Abbasi, P., Ngo, A. T., Karis, K., Jokisaari, J. R. et al. (2018). A lithium–oxygen battery with a long cycle life in an air-like atmosphere. Nature 555(7697), 502–506. 10.1038/nature25984 · Checked 15 Oct 2026
  14. Kondori, A., Esmaeilirad, M., Harzandi, A. M., Amine, R., Saray, M. T., Yu, L. et al. (2023). A room temperature rechargeable Li2O-based lithium-air battery enabled by a solid electrolyte. Science 379(6631), 499–505. 10.1126/science.abq1347 · Checked 15 Oct 2026
  15. Dong, D. & Lu, Y.-C. (2023). Working at room temperature. Science 379(6631), 436–437. 10.1126/science.ade2302 · Checked 15 Oct 2026

Page reviewed 15 Oct 2026

Source

Open, as listed by Wikipedia · Unsolved problems in chemistry. Checked 08 Oct 2026.

The status is the source’s. Papex does not decide whether a problem is solved.

Records on this problem

No public record addresses this problem yet.

More in Chemistry